PoE Extender for Coaxial Cable

PoE / EoC Ethernet Extender PoE Over Coaxial Cable



Out of stock

Click to buy on

Related Products

  • Voltage and Current Tester for Power over Ethernet



    Voltage and Current Tester for PoE

These devices connect to your PoE switch or Injector to accept power and data in the same Ethernet cable using pins 1,2 and 3,6 or 4,5 and 7,8. This is converted to 75 ohm Coax in the transmitter. It is then converted back from Coax to Ethernet remotely, and it delivers PoE (always on) to a Camera or access point remotely.

Extend Ethernet over Coax
• Adapt standard Ethernet cable to coax and back with power on the same cable
• For 1 device with 15 or 25 watts delivered
• Power 802.3af devices remotely
• Power 12v,PoE devices like Hikvision and Dahua
• Extend power to 800 ft or 250 meters over Coax like RG59 or RG6
• Extend power to 328 ft or 100 meters additionally over CAT-5e cable
• Remove Power is on all the time at the voltage from the Switch/Injector minus cable loss
No power supply included

Additional Information

Weight 13 oz
Dimensions 7 x 4 x 2 in


There are no reviews yet.

Be the first to review “PoE Extender for Coaxial Cable”

3 × four =