RJ45 Ethernet Cable Sharing Splitter Kit – combines two data links on one Ethernet cable

  • RJ45 Combiner / Splitter kit splits the cable pairs on any Cat 5e/6 cable into two separate data links to connect two remote devices without needing two cables. Each pair of remote devices shares one splitter
  • Requires two Switch ports and one Combiner at the switch end of the link. Both ends are included in this listing
  • Supports 10/100 data rates for each circuit
  • PoE with 802.3af or 802.3at supported ( up to 60 watts possible if used with the WT-AT-4)
  • Expert Tech support direct from Austin, Texas. Call 512-479-0317

Product Description: 

RJ45 Combiner/Splitter Kit
The WiFi-Texas RJ45 Combiner / Splitter Kit saves money by allowing one Ethernet cable to be uses for 2 devices
– Using two Male RJ45 and one Female – fewer connections are needed.

Important Notes
– Each connected device requires a separate router/switch port
– only 10/100 is supported over 2 pairs according to Ethernet standards
– The WiFi-Texas brand supports PoE applications

Specifications for dual LAN use
– Long run connection 1 x 8P/8C RJ45 Female
– Device/Switch Connector: 2 x 4P/4C RJ45 Male
– Cable Rating: Cat 5e
– Max Speed Rating: 100Mb
– 25 watts per circuit if CAT-6 is used

uPoE usage
– Use with the WT-AT-5 or WT-AT-8 devices to provide 60 watts of power
– Combines two 802.3at ports into one uPoE port
– Max Speed Rating: 1000Mb in uPoE usage
– Requires one on the PoE side and one on the LAN side of the WT-AT-4 device
– No splitter required at the remote device

Package Contents
2 x RJ45 Combiner/Splitter

Additional Information

Weight 4 oz
Dimensions 2 x 2 x 5 in


There are no reviews yet.

Be the first to review “WT-MMF-RJ45”

2 × 4 =