Gigabit PoE Injector - 1 port with 48v60w power
Gigabit PoE Injector - 1 port with 48v60w power

WT-GPOE-1-AB-48v60w

Single Port Gigabit Injector (Modes A and B) with 48 volt 60 watts power supply

$27.95

The WT-GPOE-1-AB-48v60w power injector kit supplies 48 volts at up to 30 watts for device like Access points, IP Cameras and IP phones, or other devices that you want to power remotely. Since standard Ethernet needs only 2 of the 4 pairs in a CAT-5,6 or 7 cable, 2 pairs are unused. Passive POE uses pins 4/5 for plus power, and 7/8 for ground.

Many popular devices use this method to centralize the power source – you can go for 328 ft with a 48v supply to a typical Access Point.

Technical Support: Tech Manuals or FAQ

  • 48 volts DC power supply included
  • 60 Watts max power load
  • Data pairs for each RJ45 – 1 and 2, 3 and 6 pass thru LAN to POE
  • + 48 volts on pins 4 and 5
  • return voltage on pins 7 and 8
  • 10/100 data rates supported
  • Wall Mount – See our inline version

Power Supply Specs

  • Input Voltage: 90-260VAC @ 47-63Hz
  • Efficiency: 90+%
  • Output Ripple: 1% Max
  • UL/CE/FCC approved
  • Line Regulation: +/- 0.5%
  • Load Regulation: +/- 1%
  • Operating Temperature: -10C to +60 deg C
  • Storage Temperature: -20C to +85 deg C
  • Operating Humidity: 5% to 90% non condensing
  • US Power cord when shipped to US destinations
  • C13 style 3 prong grounded AC connector

Additional Information

Weight 16 oz
Dimensions 8 x 4 x 4 in