WT-AT-4-56v120w

4 Port Gigabit 802.3at auto negotiating PoE+ Injector for Cisco, Meraki, and More. Includes 56 volt 120 watt power supply

$109.95

The WT-AT-4 802.3at injector for 4 gigabit devices provides up to 25 watts per port from one supply. These devices provide power on the Ether data pin 1 and 2, and 3 and 6. The voltage is supplied to each port only after negotiation, and no power is supplied to non-PoE devices.

While our passive PoE injectors can provide 60 watts of “always on” Power over Ethernet, the WT-AT-4 negotiates with 802.3af and 802.3at devices to signal that ample power is available. Many Cisco, Meraki, Aruba and high end IP Cameras disable some features unless an 802.3at injector is used. For IP phone applications, the WT-AT-4 provides power only to PoE devices, it is perfect for offices where users could unknowingly connect non-PoE devices like laptops or copy machines to passive PoE. Total power options of 30 to 120 watts are available in the wall mount style, more in our rack mount versions.

802.3at on-Demand Gigabit PoE 8 Port Power over Ethernet Injector for PoE Cameras, IP Phones, Wifi Access Points, Includes 56 Volt 120 watt Power Supply with UL, DoE, FCC listings

  • Gigabit Power over Ethernet 802.3at injector, 4 port wall mount with 48 volt power supply
  • For 802.3at devices like, WiFi Access Points, Cameras etc
  • Shares data and power on pins 12 and 36 for 802.3af devices – auto negotiation,
  • Power is OFF until a compatible device is connected
  • Mix 10/100 and gigabit devices, see also PoE solutions up to 24 ports
  • Expert USA Tech Support – call 512 479 0317

Product Description:

Capacity: 120 watt 4 port 802.3at

These devices provide power and data in the same Ethernet cable using pins 1,2 and 3,6. All devices receive the same voltage (48v) – total of all devices is 120 watts. Check device specs for power needs, it is under 4 watts for most Phones, other devices need more.

Add gigabit PoE to Any Switch:

  • Proven reliability
  • Mix 10/100 and gigabit data rate and power on the same cable
  • For 4 devices with 120 watts total power
  • Power 802.3at devices
  • Power Cisco, Meraki, Aruba 802.11ac devices
  • 4 data in, 4 Data + PoE out
  • This is not a switch – use it to add PoE to any switch or router
  • Extend power to 328 ft or 100 meters
  • Power is off until a compatible device is connected

Power Supply Included:

  • 56 volts DC, 2.2 amps, 120 watts
  • 110 to 220 volt AC operation
  • 90% efficient
  • UL, DoE, CE and FCC listed

This Device Offers:

  • 4 Shielded RJ-45 LAN
  • 4 Shielded RJ-45 LAN+POE
  • PoE status LED for each jack
  • All 4 data pairs active for gigabit data rates
  • Shared data and power
  • Supports 802.3at class 0, 1, 2, 3, 4

Applications:

  • 802.11ac WiFi access points like Aruba, Cisco, Meraki
  • IP Phones like Yealink Grandstream, Polycom etc
  • IP Cameras like outdoor dome cameras
  • Any 802.3at Device
  • 12 volt, poe devices (- please see our video on this topic)
  • USB, 5v and 12v , non-poe devices – please see our active splitters

Other Products from WiFi-Texas:

  • See also our 10/100 and rackmount versions and switches
  • WT-AF-8-56v120w for 802.3at
  • WT-GPOE-4-48v48w with 4 ports always on and lower cost
  • WS-GPOES-8-7-48v60w with integrated switch
  • WS-POE-8-48v60w for 10/100 speed data
  • WS-GPOE-16-48v120w for more ports
  • WS-POE-12-48v120w for 10/100 speeds and high power
  • WS-PoE-Tester to display power used by a device
  • WT-AF 5 and 12 volt splitters
  • Full details and data sheet at http://wifi-texas.com/

Additional Information

Weight 36 oz
Dimensions 8 x 4 x 4 in

Reviews

There are no reviews yet.

Be the first to review “WT-AT-4-56v120w”

three × 3 =