Power over Ethernet for Apple iPad for 802.3af Switches with native Lightning (no data output)


Related Products


  • 10 watt Apple lightning Power over Ethernet PoE up to 328ft via Ethernet cable – requires a 802.3af PoE switch or 48v injector
  • Regulated USB ( 5 volt) power regardless of distance for any PoE or PoE+ switch or injector
  • for iPads and iPhones using Lightning connectors
  • fast charging, cool operation, see other listings for USB, microUSB, and Raspberry Pi and for gigabit data

Remote Power for Lightning® devices with up to 10 watts

Use this Splitter to power an iPad remotely
• Extend power to 328 ft with Cat-5e or CAT-6 cable

• compatible with 802.3af, any polarity
• 802.3af to 5 volt 10 watt splitter with right angle lightning connector
• RJ45 female input power and data
• supports all 802.3af modes
• used with PoE switches 802.3af or 802.3at or passive Injectors with 48 to 56volts
• Mix 5v and 12v and 802.3af on the same PoE switch or injector
• These devices use power from the ethernet cable. The splitter at the USB device lowers the voltage to 5 volts to operate the device.
• 250 ma from the 802.3af side produces 2 amps on the 5v side

Other Options
• If you do not already have a PoE switch, you can power up to 16 devices from one power source, use our 4, 8 or 12 or 16 port, 48v injector and select the number of splitters you need.
• See also the WS-POE-5v product for lower cost passive solutions

Related Products
• WS-POE-8-48v60w injector
• WS-POE-16-48v120w 16 port injector
• WT-AT-12v12w 12 volt splitter
• WT-AT-24v15w 24 volt splitter

Additional Information

Weight 1.5 oz
Dimensions 6 x 0.8 x 1.5 in


There are no reviews yet.

Be the first to review “WT-AF-5v-Lightning”

10 + 5 =