The WS-POES-8-7-19.5v60w is a passive Power over Ethernet injector with integrated 8 port fast ethernet switch that provides 19.5 passive PoE devices with data and power up to 60 watts.
You can also power this PoE switch remotely via the PoE+Data uplink port or mix Mode A and Mode B devices in one switch. Each port has both PoE modes, and 2 self resetting fuses. Use our rack mount for two in a 1U high rack for 14 PoE ports.
- 8 port switch with 7 PoE ports – passive, always on power
- wall mount : 1 uplink switch port, 7 LAN+Power ports, shielded
- power VOIP phones, IP Cameras, WiFi Access Points, and more. Older Cisco phones use reverse PoE. We have adapters for all applications.
- same voltage to all ports, share available power equally
- 2.1mm x 5.5mm DC plug for Mode A operation
- 2.1mm x 5.5mm DC plug for Mode B operation
- LED power light for each mode, 24v and 48v indicator
- use our PoE calculator if you would like to know the delivered voltage to the remote
- for 12 volt cameras – ask us first, most use 48v when powered by Ethernet
Power Supply Specs
- Input Voltage: 90-260VAC @ 47-63Hz
- Efficiency: 90+%
- Output Ripple: 1% Max
- UL/CE/FCC approved
- Line Regulation: +/- 0.5%
- Load Regulation: +/- 1%
- Operating Temperature: -10C to +60 deg C
- Storage Temperature: -20C to +85 deg C
- Operating Humidity: 5% to 90% non condensing
- US Power cord when shipped to US destinations
- C13 style 3 prong grounded AC connector