WS-POE-16-48v60w

16 port 1U Rack mount 10/100 shielded injector including a 48 volt power supply with 60 watts total power shared equally to all ports

$99.95

Click to buy on Ebay

Related Products


The WS-POE-16-48v60w Power over Ethernet (POE) injector provides power to as many as 16 devices from a central power source up to 328 ft (100 meters) away. Use this device to inject power into the CAT-5, CAT-6 or CAT-7 cable and power devices such as cameras, VOIP phones, and WiFi access points.

The injector works works with any ethernet switch or router. The 48 volt 60 watt power supply provides 48 volts to all ports, and 60 watts is the total available power for all devices. Minus the auto-negotiation of 802.3af, this kit will power your 802.3af or 802.3at devices with always on power. If the device shows “12v, PoE” on the data sheet – this means that the device uses 12v when powered from a transformer – and 48v when powered via Ethernet.

<

  • rack mount : 16 shielded LAN ports, 16 LAN+Power ports, 650 ma per port limiter
  • 48 volts DC power supply included
  • 60 Watts max power load
  • 2.1mm x 5.5mm DC input Jack
  • Data pairs for each RJ45 – 1 and 2, 3 and 6 pass thru LAN to POE
  • + 48 volts on pins 4 and 5
  • return voltage on pins 7 and 8
  • 10/100 data rates supported
  • 12x self resetting 650 ma fuses limit load to 30 watts per port
  • Rack Mount – 1U high 19 inch standard
  • 19 x 1.75 x 1 inches

Power Supply Specs

  • Input Voltage: 90-260VAC @ 47-63Hz
  • Efficiency: 90+%
  • Output Ripple: 1% Max
  • UL/CE/FCC approved
  • Line Regulation: +/- 0.5%
  • Load Regulation: +/- 1%
  • Operating Temperature: -10C to +60 deg C
  • Storage Temperature: -20C to +85 deg C
  • Operating Humidity: 5% to 90% non condensing
  • US Power cord when shipped to US destinations
  • C13 style 3 prong grounded AC connector

 

Additional Information

Weight 40 oz
Dimensions 20 x 4 x 2 in

Reviews

There are no reviews yet.

Be the first to review “WS-POE-16-48v60w”

twenty + seven =