6 port Wall Mount gigabit shielded injector including a 24 volt power supply with 120 watts total power shared equally to all ports
6 port Wall Mount gigabit shielded injector including a 24 volt power supply with 120 watts total power shared equally to all ports
6 port Wall Mount gigabit shielded injector including a 24 volt power supply with 120 watts total power shared equally to all ports
Gigabit Pinout Diagram
6 port Wall Mount gigabit shielded injector including a 24 volt power supply with 120 watts total power shared equally to all ports
6 port Wall Mount gigabit shielded injector including a 24 volt power supply with 120 watts total power shared equally to all ports
6 port Wall Mount gigabit shielded injector including a 24 volt power supply with 120 watts total power shared equally to all ports
Gigabit Pinout Diagram

WS-GPOE-B-12-24v120w

Gigabit Power Over Ethernet, passive POE injector 12 ports with 24 volt 120 watts

$149.95

Click to buy on
Click to buy on Ebay

Related Products

gigabit POE 12 Port Power over Ethernet Injector with 24 volt 120 watt supply

  • Gigabit Power over Ethernet injector, 1U rack mount with 120 watt 24 volt power supply
  • For Mikrotik 24 volt devices (not for Ubiquiti UAP)
  • Shares data and power on pins 45 + and 78 – (mode B)
  • Click on “WiFi-Texas com inc” to see versions with 48v power supplies or 60 watts
  • Expert USA Tech Support – call 512 479 0317

Product Description:

Remove clutter in your installations, replace up to 12 individual power over ethernet injectors with this single gigabit POE module.

Rack Mounted PoE injector

Extend power to 328 ft or 100 meters

This device offers

  • 12 shielded RJ45 jacks with Data + Power outpower per port limited to 650 ma
  • 12 shielded RJ45 jacks Data in – connect to your switch
  • 2x 2.1mm x 5.5mm DC power jacks – primary and secondary DC power
  • LED power status
  •  LED power usage status per 4 ports
  • 10/100/1000 operation
  • 24v 120watt power supply, 100-240v, 50/60 hz
  • add a 2nd power supply for redundancy
  • we offer 7 different power supply options

Used to provide PoE power to:
* Mikrotik systems

These devices provide power on the data lines 4 and 5, and 7 and 8. All devices receive the same voltage – choose a power supply with more available power than the total all devices. Check device specs for power needs

We offer 18v, 24v and 48v supplies, with 60 and 120 watt versions, also 6 port versions.

LED status show power for all 12 port, and for each group of 4. For each group of 4 port an LED indicates:
Port current 0 to 20ma = LED off
Port current 20 to 400ma = LED is green
Port current >400ma = LED is red

Full details and data sheet at http://wifiqos.com/

Uses a 2.1mm x 5.5mm DC connector times 2, connect 2 power supplies for redundant operation. We also stock 12v to 48v power supplies, and lower cost 100mb versions.

Additional Information

Weight 87 oz
Dimensions 20 x 6 x 2 in

1 review for WS-GPOE-B-12-24v120w

  1. 5 out of 5

    :

    I use these to power 12 Unifi-UAP. It works fabulously. Almost fabulously… my closest AP is about 170 ft. My furthest one is 280 ft. Most are about 220ft. This is probable the reason why most of the power LED go to red intermittently. Still, a great product in comparison to the $400.00 TS-16-Carrier from Ubiquiti

    • :

      We’re glad you like it!

      Just a note: The red is not a warning indicator, it just means 300 ma on a group of 4 ports. The actual limit is 650 ma for each port, or 10x the point at which the LED shows red.

Add a review

15 − 10 =