Gigabit Pinout Diagram
Gigabit Pinout Diagram


6 port Wall Mount gigabit shielded injector including 56 volt power supply with 60 watts total power shared equally to all ports


Click to buy on

Related Products

802.3at gigabit passive POE 6 Port Power over Ethernet Injector with 60 watts

  • Gigabit Power over Ethernet injector, 6 port wall mount with dual 30 watt 56 volt power supplies
  • For 802.3at PoE WiFi Access Points, Cameras and other AT class devices
  • Shares data and power on all4 pairs – always on power to all 6 PoE outlets
  • Click on “WiFi-Texas com inc” to see versions with 48v power supplies or 60 watts
  • Expert Tech support – ask if you have any questions 512 479 0317

Product Description:

Remove clutter in your installations, replace up to 6 individual power over ethernet injectors with this single 6 port gigabit POE module.

Wall Mounted PoE injector

Extend power to 328 ft or 100 meters

This device offers

  • 6 shielded RJ45 jacks with Data + Power out
  • Power per port limited to 2x 650 ma
  • 6 shielded RJ45 jacks Data in – connect to your switch
  • Optional ground lead connected to the shields – ground for outdoor applications
  • Dual 2.1mm x 5.5mm DC power jacks
  • Use both DC inputs to provide 25 watts per port
  • See also our 120 watt and 240 watt versions
  • 10/100/1000 operation
  • 56 volts is applied to all PoE ports equally, always on (no negotiation)
  •  LED power status
  • Dual 56v 30watt power supplies, 100-240v, 50/60 hz included
  • We offer 9 different power supply options

Used to provide PoE power to:

  • IP Cameras
  • IP Phones
  • WiFi Access Points

These devices provide power on the data lines 1 and 2, and 3 and 6 from the A power input, and 4,5 and 7,8 from the B power input. All devices receive the same voltage – choose a power supply with more available power than the total all devices. Check device specs for power needs.

We offer 18v, 24v and 48v supplies, with 60 and 120 watt versions, also 12 port versions.

LED status show power for all 6 ports

  • Port current 0 to 20ma = LED off
  • Port current 20 to 400ma = LED is green
  • Port current >400ma = LED is red

Full details and data sheet at

Uses a 2.1mm x 5.5mm DC connector We also stock 12v to 48v power supplies, and lower cost 100mb versions with up to 16 ports.

Power Supply Specs:

  • Input Voltage: 90-260VAC @ 47-63Hz
  • Efficiency: 90+%
  • Output Ripple: 1% Max
  • UL/CE/FCC approved
  • Line Regulation: +/- 0.5%
  • Load Regulation: +/- 1%
  • Operating Temperature: -10C to +60 deg C
  • Storage Temperature: -20C to +85 deg C
  • Operating Humidity: 5% to 90% non condensing
  • US Power cord when shipped to US destinations
  • C13 style 3 prong grounded AC connector

Additional Information

Weight 21 oz
Dimensions 8 x 4 x 4 in


There are no reviews yet.

Be the first to review “WS-GPOE-AT-6-56v60w”

19 + 3 =