Gigabit Pinout Diagram
Gigabit Pinout Diagram


12 port 1U Rack mount gigabit shielded injector including a 56 volt dual power supply with 144 watts total power shared equally to all ports


Click to buy on Ebay

Related Products

The WS-GPOE-AT-12-56v144w Gigabit Power over Ethernet injector allows you to power up to 12 devices remotely over ethernet wiring up to 328 ft (100 meters) away. Add PoE ability to any Ethernet switch or router. Use this device to inject power into the CAT-5, CAT-6 or CAT-7 cable. Power is sent together with gigabit data on pins 1,2 and 3,6.

100mb/s kits are also available. Use with Mikrotik-routerboard, Cisco, Polycom and any 802.3af or 802.3at device.

  • rack mount : 12 LAN ports, 12 LAN+Power ports, 650 ma per port limiter, shielded
  • power VOIP phones, IP Cameras, WiFi Access Points, and more
  • same voltage to all ports, share available power equally
  • 2.1mm x 5.5mm DC plug “Mode A” for primary power for 802.3af
  • 2.1mm x 5.5mm DC plug “Mode B” for a redundant power supply, for Mikrotik, or for 802.3at devices
  • LED power light
  • works with any ethernet switch or router
  • use our PoE calculator if you would like to know delivered voltage to the remote device – Online Calculator


Power Supply Specs

  • Input Voltage: 90-260VAC @ 47-63Hz
  • Efficiency: 90+%
  • Output Ripple: 1% Max
  • UL/CE/FCC approved
  • Line Regulation: +/- 0.5%
  • Load Regulation: +/- 1%
  • Operating Temperature: -10C to +60 deg C
  • Storage Temperature: -20C to +85 deg C
  • Operating Humidity: 5% to 90% non condensing
  • US Power cord when shipped to US destinations
  • C13 style 3 prong grounded AC connector


Additional Information

Weight 93 oz
Dimensions 20 x 6 x 6 in


There are no reviews yet.

Be the first to review “WS-GPOE-AT-12-56v144w”

nine − six =