Gigabit Poe injector – 6 Port Power over Ethernet – for 802.3af, 802.3at, and Mikrotik, Airfiber systems. Power supplies available separately
- Gigabit Power over Ethernet injector, wall mount, 6 pairs of ports, shielded RJ45, with ground lead
- IP Phones, Access Points and IP Cameras that use gigabit Ethernet
- Power 802.3af or 802.3at devices (power on all the time) – power shared between all ports
- Click on “WiFi-Texas com inc” to see versions including power supplies
- Expert USA Tech Support – call 512 479 0317
Remove clutter in your installations, replace up to 6 individual power over ethernet injectors with this single gigabit POE module.
Wall Mounted PoE injector
Extend power to 328 ft or 100 meters
This Device Offers:
6 shielded RJ45 jacks with Data + Power out
Power per port limited to 650 ma
6 shielded RJ45 jacks Data in – connect to your switch
Dual 2.1mm x 5.5mm DC power jacks
LED power status
We offer 7 different power supply options
Used to Provide PoE Power to:
- IP phones like Polycom, Cisco, Yealink, Grandstream, Shoretel
- WiFi Access points
- IP Cameras
- 802.3af devices
These Devices Provide Power on 2 or 4 pairs of Data Lines:
- Mode A is pins 1 and 2, and 3 and 6.
- Mode B is pins 4 and 5, and 7 and 8.
- All devices receive the same voltage – choose a power supply with more available power than the total all devices. Check device specs for power needs, it is under 4 watts for most Phones, other devices need more.
We offer 18v, 24v, 48v and 56v supplies, with 15, 30, 60 and 120 watt versions, also 6 and 12 port versions.
Full details and data sheet at our web site