16 port 1U Rack mount Gigabit shielded injector including a 48 volt power supply with 120 watts total power shared equally to all ports
16 port 1U Rack mount Gigabit shielded injector including a 48 volt power supply with 120 watts total power shared equally to all ports
16 port 1U Rack mount Gigabit shielded injector including a 48 volt power supply with 120 watts total power shared equally to all ports
16 port 1U Rack mount Gigabit shielded injector including a 48 volt power supply with 120 watts total power shared equally to all ports
16 port 1U Rack mount Gigabit shielded injector including a 48 volt power supply with 120 watts total power shared equally to all ports
16 port 1U Rack mount Gigabit shielded injector including a 48 volt power supply with 120 watts total power shared equally to all ports

WS-GPOE-16-48v120w

16 port 1U Rack mount Gigabit shielded injector including a 48 volt power supply with 120 watts total power shared equally to all ports

$159.95

Gigabit Passive PoE 16 Port Power over Ethernet Injector for PoE Cameras, IP Phones, Wifi Access Points, Includes 48 Volt Power Supply 120 watts

  • Fanless Gigabit Power over Ethernet injector, 16 shielded RJ45 ports, 1U rack mount, with 48 volt power supply 120 watts
  • For 802.3af devices like IP Phones, WiFi Access Points and PoE Cameras that use PoE. 10/100 or gigabit speeds.
  • Compatible with Polycom, Aruba, Yealink, Cisco, etc – all PoE device. Power is always on.
  • Add PoE to any switch, mix 10/100 and gigabit devices, see also our PoE solutions up to 24 ports
  • Questions? Call our expert, USA-based Tech Support at 512 479 0317

Product Description:

This device provides power and data in the same Ethernet cable using pins 1,2 and 3,6 ( 802.3af mode A). All devices receive the same voltage (48v) – total of all devices is 120 watts. Check device specs for power needs, it is under 4 watts for most Phones, other devices need more.

Add Gigabit PoE to Any Switch :

  • Proven reliability since 2012
  • Mix 10/100 and gigabit data rate and power on the same cable
  • For 16 devices with 120 watts total power
  • Power 802.3af devices
  • Power 12v,PoE devices like Hikvision
  • 16 data in, 16 Data + PoE out
  • This is not a switch – use it to add PoE to any switch or router
  • Extend power to 328 ft or 100 meters
  • Power is on all the time

Power supply included:

  • 48 volts DC, 2.5 amps, 120 watts
  • 110 to 220 volt AC operation
  • 90% efficient
  • UL, CE and FCC listed
  • Input Voltage: 90-260VAC @ 47-63Hz
  • 2nd power supply input for redundancy
  • Output Ripple: 1% Max
  • UL/CE/FCC approved
  • Line Regulation: +/- 0.5%
  • Load Regulation: +/- 1%
  • Operating Temperature: -10C to +60 deg C
  • Storage Temperature: -20C to +85 deg C
  • Operating Humidity: 5% to 90% non condensing
  • US Power cord when shipped to US destinations
  • C13 style 3 prong grounded AC connector

Applications:

  • IP phones like Polycom, Cisco, Yealink
  • WiFi Access points
  • IP Cameras like Hikvision
  • Any 802.3af Device
  • 12 volt, poe devices (- please see our video on this topic)
  • USB, 5v and 12v , non-poe devices – please see our active splitters

Other products from WiFi-Texas

  • See also our 10/100 and rackmount versions and switches
  •  WT-GPOE-4-48v48w with 4 ports
  • WS-GPOES-8-7-48v60w with integrated switch
  • WS-POE-8-48v60w for 10/100 speed data
  • WS-GPOE-12-48v120w for fewer ports
  • WS-POE-12-48v120w for 10/100 speeds and high power
  • WS-PoE-Tester to display power used by a device
  • WT-AF 5 and 12 volt splitters
  • Full details and data sheet at http://poe-texas.com/

Additional Information

Weight 87 oz
Dimensions 20 x 4 x 3 in

Reviews

There are no reviews yet.

Be the first to review “WS-GPOE-16-48v120w”

one + three =