12 port 1U Rack mount gigabit shielded injector including a 48 volt power supply with 120 watts total power shared equally to all ports


Click to buy on
Click to buy on Ebay

Related Products


Gigabit 12 Port Power over Ethernet Injector Passive PoE for 802.3af Devices with Fanless 48 Volt 120 Watt Supply

  • Gigabit Power over Ethernet injector, 1U rack mount with 120 watt 48 volt power supply
  • Power 12 IP Phones, Access Points or IP Cameras – with 802.3af
  • Add PoE to any switch or router, add a 2nd supply for redundancy or higher capacity
  • Click on “WiFi-Texas com inc” to see versions with 24v power supplies or 60 watts
  • Expert USA Tech Support – call 512 479 0317

Product Description:

Rack mount : 12 LAN ports, 12 LAN+Power ports, 650 ma per port limiter, shielded

Remove clutter in your installations, replace up to 12 individual power over ethernet injectors with this single gigabit POE module.

Rack Mounted PoE injector

Extend power to 328 ft or 100 meters

This device offers

  • 12 shielded RJ45 jacks with Data + Power out
  • Power per port limited to 650 ma
  • 12 shielded RJ45 jacks Data in – connect to your switch
  • 2x 2.1mm x 5.5mm DC power jacks – primary and secondary DC power
  • LED power status
  • LED power usage status per 4 ports
  • 10/100/1000 operation
  • 48v 120watt power supply, 100-240v, 50/60 hz
  • Add a 2nd power supply for redundancy
  • We offer 7 different power supply options

Used To Provide PoE Power To:

  • IP phones like Polycom, Cisco, Yealink
  • WiFi Access points
  • IP Cameras
  • 802.3af devices
  • These devices provide power on the data lines 1 and 2, and 3 and 6. This is 802.3af mode A. All devices receive the same voltage – choose a power supply with more available power than the total all devices. Check device specs for power needs, it is under 4 watts for most Phones, other devices need more

We offer 18v, 24v and 48v supplies, with 60 and 120 watt versions, also 6 port versions.

LED status show power for all 12 port, and for each group of 4. For each group of 4 port an LED indicates:

  • Port current 0 to 20ma = LED off
  • Port current 20 to 400ma = LED is green
  • Port current >400ma = LED is red
  • Full details and data sheet at

Uses a 2.1mm x 5.5mm DC connector times 2, connect 2 power supplies for redundant operation. We also stock 12v to 48v power supplies, and lower cost 100mb versions.

Power Supply Specs:

  • Input Voltage: 90-260VAC @ 47-63Hz
  • Efficiency: 90+%
  • Output Ripple: 1% Max
  • UL/CE/FCC approved
  • Line Regulation: +/- 0.5%
  • Load Regulation: +/- 1%
  • Operating Temperature: -10C to +60 deg C
  • Storage Temperature: -20C to +85 deg C
  • Operating Humidity: 5% to 90% non condensing
  • US Power cord when shipped to US destinations
  • C13 style 3 prong grounded AC connector

Additional Information

Weight 87 oz
Dimensions 20 x 4 x 2 in


There are no reviews yet.

Be the first to review “WS-GPOE-12-48v120w”

seven + 20 =