PoE Injectors Forums IP Cameras Static IP address w/ POE switch

This topic contains 1 reply, has 2 voices, and was last updated by  Stephen 2 years, 3 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #5236

    PoE Questions

    I have 5 Hikvision IP POE Cameras in the following models and Quantities:
    DS-2CD2532F-I(S) QTY 2
    DS-2CD3332-I QTY 2
    DS-2CD2032-I QTY 1
    Can I link your POE switch to one of the two remaining available ports on the gigabit Switch and statically assign an IP address to each camera on the same network? If I wanted to use DHCP (which I wouldn’t) would DHCP be assigned when these network devices are linked in this manner?

    Thank you



    the 48v 60w supply in our kits will power your cameras without problems
    however – the WS-POE-8-48v60w is not a switch – it is just the injector. To add switch functions for these 5 cameras – for up to 7 total – you would need
    WS-POES-8-7-48v60w is the best solution. 7 PoE ports, one uplink to your network – static or DHCP.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.