PoE Injectors Forums IP Cameras Multiple different foscams

This topic contains 1 reply, has 2 voices, and was last updated by  Stephen 2 years, 3 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #5219

    PoE Questions

    I have Foscam cameras that I am trying connect and the specs are different. I saw your product and would like to know what you recommend.

    I am looking for gig connection. I plan on grow my cameras up to (10). the (2) cameras I have so far show the following power consumption:

    Foscam FI9831P Power Comsunption 7.5 Watts
    Power Supply DC 5V2.0A
    Foscam FI9853EP Power Comsumption 4.2 Watts
    Power Supply DC 12V/1.0A

    Any help would be greatly appreciated.



    please use our WS-POE-5v for the 9831 devices – use our WS-GPOE-6-24v60w for the gigabit injector.
    for the 9853EP – these actually use 48 volts – so our WS-GPOE-6-48v60w is the right solution – no splitter is required.
    Please note: these cameras do not operate at gigabit data speeds. So you can also use our
    WS-POE-8-24v60w or WS-POES-8-7-24v60w for the 9831
    WS-POE-8-48v60w or WS-POES-8-7-48v60w for the 9853

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.