PoE Injectors › Forums › IP Cameras › 60 watts to a single port? This topic contains 2 replies, has 2 voices, and was last updated by Stephen 2 years, 3 months ago. Log In Register Lost Password Viewing 3 posts - 1 through 3 (of 3 total) Author Posts May 29, 2015 at 6:35 pm #5232 PoE QuestionsParticipant Trying to power an Axis Q6035-E camera. Can the WS-POE-8-48v60w provide 60 watts to a single port? — May 29, 2015 at 6:35 pm #5233 StephenKeymaster Hi – we have a solution. this device uses a lot of power… It supports 802.3at – because 60w on 2 pairs of ethernet wire is not a good idea Instead – the following products are solution options a) our WS-GPOE-AT-6 https://find-a-poe.com/product/WS-GPOE-AT-6-56v60w/ b) our WS-POES-8-7 with our WS-PS-56v60w power supply https://find-a-poe.com/product/WS-POES-8-7/ https://find-a-poe.com/product/WS-PS-56v60w/ a is an injector, b is an injector with switch thanks May 29, 2015 at 6:36 pm #5235 StephenKeymaster you can use our active splitters to step the 24v passive PoE down to 5v for the Dlink. Then we have a 1.35mm to 2.5mm right angle adapter to fit the Dlink. this will work with either our 24v injector or any other 24v passive injector. Please purchase https://find-a-poe.com/product/WS-POE-5v10w/ https://find-a-poe.com/product/1-35mm-2-5mm/ Author Posts Log In Register Lost Password Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.